Y2 Ceramic Capacitor

Y capacitor-usually high-voltage ceramic chip. The Y-type capacitor is connected between the phase wire and the ground wire. In order not to exceed the relevant safety standards to limit the ground wire allowed leakage value, the value of these capacitors in a few N F. In general, Y capacitors should be connected to wires with greater noise interference. Y 1 is a double-insulated y capacitor, used to span the primary and secondary side. Y 2 is a basic single-insulated Y capacitor, which is used to connect FG line. X-capacitor y-capacitor is called safety capacitor, safety capacitor is used for such occasions, that is, after the capacitor failure, will not lead to electric shock, not endanger personal safety. The Y capacitor is connected between the input and ground wires to eliminate common-mode interference. And production, capacitors are divided into x capacitor and Y capacitor, fire line between the zero line is X capacitor. The X capacitor is used in the power filter, which acts as a power filter and a filter for differential mode interference. A capacitor connected in parallel between the fire line and the zero line and the ground is commonly called a Y capacitor. Since the location of the capacitor connection is also critical, it is also required to meet safety standards. Therefore, the Y capacitor is also one of the safety capacitors.

Hot Tags: y2 ceramic capacitor, China y2 ceramic capacitor manufacturers, safety ceramic capacitor for special vehicles, safety ceramic capacitor for military vehicles, safety ceramic capacitor for vintage vehicles